Set it down and burn. Anywhere on the piece.
If you own a LaserPecker LP1 Pro, you know the two ways to hold it up. The tripod is fiddly and a pain to set up every time. The self-adjusting stand is great, but its base means you can only burn the edge of anything large, like a chopping board or a tabletop.
This printable stand fixes both. It seats your LP1 Pro exactly 200 mm above whatever the ring is sitting on, and it’s already locked at the right height, so there’s nothing to adjust. The frame is just a ring and three legs, so you place it anywhere on the piece and burn there. The edge, the centre, a table, a huge board: it makes no difference.
Why you’ll love it
No setup, no fiddling: the height is built in. Set it down, seat the laser and go.
Burn anywhere, on any size piece: no base to run out of room. Move the stand to the spot you want, whether that’s the middle of a big chopping board or a whole table.
Full 100 x 100 mm burn area: the open frame and the 45 degree flared beam window keep the stand out of the beam.
Three legs, three support points: the laser platform seats evenly.
5 printed parts, no hardware: one base ring, one top ring and three legs. Legs peg into the rings with no screws or bolts.
One print plate, no supports needed: designed for PLA, sized for a 270 x 270 mm bed. Prints cleanly with no supports.
You’ll need
A 3D printer with at least a 270 x 270 mm bed, plus PLA.
A LaserPecker LP1 Pro. The pocket is shaped perfectly for its head.
FAQ
Is the laser included? No. This is the STL file for the stand only.
Where is the height measured from? From the surface the base ring sits on. For a flat piece such as a board or tabletop, set the stand on the piece itself.
How do I download it? One STL with all five parts on one plate, delivered instantly after purchase.
Licence and terms of use
This is a digital product. When you buy it, you’re buying a licence to use the file, not ownership of the design. The design, the STL file and all related images remain the intellectual property of JND Creations.
You can
Print as many copies as you need for your own personal use.
You can’t
Resell, redistribute, share, upload or give away the STL file, in whole or in part, or any modified version of it.
Sell, trade or list printed copies, including on marketplaces, at markets or through third parties.
Claim the design as your own or republish it under another name.
Use the images or text from this listing without permission.
Your licence is for one buyer only. If someone else wants the file, they need to buy their own copy. Breach of these terms ends your licence, and JND Creations may take action to protect its intellectual property.
© JND Creations. All rights reserved.
Not affiliated with or endorsed by LaserPecker. LaserPecker and LP1 Pro are trademarks of their respective owners.
Set it down and burn. Anywhere on the piece.
If you own a LaserPecker LP1 Pro, you know the two ways to hold it up. The tripod is fiddly and a pain to set up every time. The self-adjusting stand is great, but its base means you can only burn the edge of anything large, like a chopping board or a tabletop.
This printable stand fixes both. It seats your LP1 Pro exactly 200 mm above whatever the ring is sitting on, and it’s already locked at the right height, so there’s nothing to adjust. The frame is just a ring and three legs, so you place it anywhere on the piece and burn there. The edge, the centre, a table, a huge board: it makes no difference.
Why you’ll love it
No setup, no fiddling: the height is built in. Set it down, seat the laser and go.
Burn anywhere, on any size piece: no base to run out of room. Move the stand to the spot you want, whether that’s the middle of a big chopping board or a whole table.
Full 100 x 100 mm burn area: the open frame and the 45 degree flared beam window keep the stand out of the beam.
Three legs, three support points: the laser platform seats evenly.
5 printed parts, no hardware: one base ring, one top ring and three legs. Legs peg into the rings with no screws or bolts.
One print plate, no supports needed: designed for PLA, sized for a 270 x 270 mm bed. Prints cleanly with no supports.
You’ll need
A 3D printer with at least a 270 x 270 mm bed, plus PLA.
A LaserPecker LP1 Pro. The pocket is shaped perfectly for its head.
FAQ
Is the laser included? No. This is the STL file for the stand only.
Where is the height measured from? From the surface the base ring sits on. For a flat piece such as a board or tabletop, set the stand on the piece itself.
How do I download it? One STL with all five parts on one plate, delivered instantly after purchase.
Licence and terms of use
This is a digital product. When you buy it, you’re buying a licence to use the file, not ownership of the design. The design, the STL file and all related images remain the intellectual property of JND Creations.
You can
Print as many copies as you need for your own personal use.
You can’t
Resell, redistribute, share, upload or give away the STL file, in whole or in part, or any modified version of it.
Sell, trade or list printed copies, including on marketplaces, at markets or through third parties.
Claim the design as your own or republish it under another name.
Use the images or text from this listing without permission.
Your licence is for one buyer only. If someone else wants the file, they need to buy their own copy. Breach of these terms ends your licence, and JND Creations may take action to protect its intellectual property.
© JND Creations. All rights reserved.
Not affiliated with or endorsed by LaserPecker. LaserPecker and LP1 Pro are trademarks of their respective owners.
